dnagao73

本文へスキップ

Nagao System INC. is a professional group specializing in physics and chemistry instruments such as original fine pulverization, dispersion and mixing.

TEL. +81-44-954-4486

1-9-30 Katahira Asao-Ward Kawasaki-City Kanagawa-Pref, 215-0023 JAPAN

???????
High Speed 3D Rotation (Simulation Movie)

NAGAO SYSTEM INC. is a professional group that solves mixing, dispersion and milling, which was previously considered impossible by utilizing high-speed 3D motion of a patented 3D Ball Mill (3D Reactor).
We are good at mainly small rotating research equipment.
mm or less (organic / inorganic) materials can be finely pulverized, mixed and dispersed to nano microns (dry & wet type possible).
Furthermore, substances (organic matter / inorganic matter) with different specific gravity and viscosity are good at blending etc., highly uniform mixing, dispersion, emulsification (3D Reactor) is good.
"Weak point of 2D motion is affected by gravity and high specific gravity and fine material will agglutinate to the bottom. High speed 3D motion, however, makes full use of the inner wall surface of the container, even with high specific gravity or fine material, it is the greatest feature not to give it. "

Recently, the demand for mixing, dispersion and emulsification of organic matter and inorganic matter in 3D ball mill (3D Reactor) is rapidly increasing.

We are manufacture and sell the equipment + special container.

Please feel the difference between the conventional high speed 2D motion (critical) and high speed 3Dmotion (non-critical).

High-speed 3D motion realizing non-criticality can be non-agglomeration, mixing with high homogeneity, dispersion, emulsification, milling possible!


High-speed 3D motion can be expected to further reduce mixing unevenness and further improve milling uniformity.

3D Ball Mill MOVIE(Ver.1)3D Ball Mill MOVIE(Ver.2)3D Ball Mill MOVIE(Ver.3)LEAFLET

Presentation@10minPresentationA3min PresentationB10minPresentationC3min PresentationD30sec

TOPICS

  • 3D Ball Mill (3D Reactor) is a patented company developed by our company.
    High-speed 3D motion was impossible in the past (2D motion), it enabled highly uniform milling, mixing and dispersing effect, enabling new product development.
    We will propose a new MONOZUKURI(manufacturing) using 3D Ball Mill (3D Reactor).
  • 【3D Ball Mill (3D Reactor)】
    ・(Organic matter・inorganic matter) and (Dry・Wet) possible!
    ・Milling sample of less than mm units from micrometers to Nano units.
    ・ Mixing and dispersion of sample with different specific gravities and viscosities can be done uniformly.
    (Reagglomeration prevents nonsolidification.)
    ・Because the whole container surface is used by frictional force, milling heat hardly occurs.
    Therefore, it is possible to milling, mixing and disperse inorganic substances and organic substances.
    ・By adopting a batch system for vessels, it is possible to crush single peaks with high uniformity.
    Noncritical motion by high-speed 3D motion
    ・It is good at milling and mixing which does not destroy the particle shape which made use of frictional force.
  • Superior points of the 3D ball mill(3D Reactor)
    @Dry process pulverization, mixture, dispersion without aggragation
    ALow thermogenesis with spherical motion
    BUniform pulverization, mixing and dispersion
    CNon-criticality based on high-speed motion
    DUniform mixing without blade
    EUtilizing friction force and achieved pulverization, mixture, dispersion with maintaining particle form

    【Merit】
    @Thermogenesis problem in high-speed 2D motion pulverization, mixture, dispersion
    【Solution】
    ・Utilizing the entire inner area of the container promotes the dispersion of frictional heat and its generation. Effective with organic and inorganic substances.
    AUneven particle size in high-speed 2D motion pulverization, mixture, dispersion
    【Solution】
    ・Batched pulverization, mixture, dispersion utilizing friction force of high-speed 3D motion. Rounded particle form and uniform particle size.
    BSolidification in 2D motion dry pulverization, mixture, dispersion
    【Solution】
    ・Achieving no solidification by high-speed 3D motion dry pulverization, mixture, dispersion .
    CUneven high-speed 2D motion mixing (because of only one axis)
    【Solution】
    ・Without blade. High-speed 3D motion makes it possible to use entire inner area of container efficiently. Low thermogenesis and uniform mixing can be achieved.
  • 【3D Ball Mill (3D Reactor) Recent Device Usage Example】
    ・Mixing and dispersion of battery materials (positive electrode materials, negative electrode materials).
    Mixing and milling of all solid state battery materials.
    ・Mixing, dispersion, pulverization of CNT.
    ・Mixing and dispersion of electroconductive pastes and inks for electroclonics.
    (For example, mixing and dispersion having a difference in specific gravity between metals and resins)
    ・Mixing and dispersion of special inks such as printer.
    (For example, metal, mixture of glass and organic solvent, dispersion)
    Mixing and dispersion of fluorescent materials and magnetic materials.
    Mixing and dispersion of photoresist materials.
    ・Thermoformed in-mold electronics, mixing, dispersion.
    ・OLED (organic light emitting display), mixing, dispersion.
    ・Mixing and dispersion of 3D printers.
    (Mixing and dispersion of ceramics and resin, etc.)
    Mixing and dispersion of organic organic EL materials.
    ・Emulsion, mixing, dispersion of plural special solvent, acrylic etc.
    ・Mixing, dispersion, emulsification of medicines and cosmetics sensitive to heat change.
    ・Optical splitting of pharmaceuticals.
  • 【Target User】
    ・Companies and universities that make products from materials.
    ・Companies and universities that make high value added products.
    ・Things that demonstrate the effect when using fine particles.
    ・Person who is troubled by uniform mixture with small specific gravity and different viscosity.
    ・If you are having trouble with reaggregation.
    ・People who need help with milling heat.
  • 【Advantages of Introducing 3D Ball Mill (3D Reactor)】
    ・Manufacturing loss (Irregular) reduction by improving uniformity.
    ・Creation of innovative materials through improvement of uniformity.
    ・Reduction of raw material costs by miniaturization and highly uniform mixing.
    ・Reduction of manufacturing time and personnel cost.
    ・Introduced manufacturing method which could not be solved by existing equipment.
    (Differentiation from other companies)
  • ・Jap.Pat. 4974283 Clinostat
    ・Jap.Pat. 5666220 Three-dimention ball mill
    ・Jap.Pat. 5620088 Waste decomposition
    ・Jap.L.O. 2012-176331 Three-demention ball mill and ball mill and milling machines
    ・Jap.Pat. 5620027 Mixing device rotation
    ・USA.Pat. 6,387,298 B1 Luminescent Materials
    【PCT】
    PCT/JP2016/063183 Mixing method and rotating device
  • Please feel the difference of the unknown area high speed 3D motion from the conventional 2D motion. 3D Reactor MOVIE(Ver.1) 3D Reactor MOVIE(Ver.2) 3D Reactor MOVIE(Ver.5)

(Medium Size) Separate type 2-axis control 3D Ball Mill(3D Reactor) 「3DB-210」
【PC control version (Manual & Program operation) available】

★Design and specifications are subject to change without notice.


【(Small Size) Separate type 3D Ball Mill (3D Reactor)(Glove box insertion model)[PC operation Model]「3DB-80(PC)」】
★Design and specifications are subject to change without notice.

(Small Size) Separate type 3D Ball Mil(3D Reactor) (Glove box insertion model)「3DB-80」

【Major Fields of use products!】

【Super Points】
【Tilted Rotation Planetary ball mill】
(Patent No.4937502Planetary ball mill)

・ (Small Size) Tilted Rotation Planetary Ball Mill 「Planet M2-3F」
・ (Small Size) Tilted Rotation Planetary Ball Mill (Glove box insertion model) 「Planet Min (-F)」

A tilted type planetary ball mill that we developed independently and acquired the patents is a product that other companies can not imitate.
The usual horizontal type planetary ball mill is exercised in only one direction lateral direction of revolution.
Compared to the conventional horizontal type planetary ball mill, our company "tilted type planetary ball mill" can exert crushing effect making full use of impact force several times higher.
The reason for this is strong impulse from two directions, patented 'diagonal in the direction of rotation' and 'sideways in the direction of revolution'.
It is also used as a reactor utilizing kinetic energy, such as mechanical alloying, which makes use of strong impact force, and mechano-chemical.
Also, since batch method is the principle, it is possible to produce high quality products in small quantities.
The field of use of the tilted type planetary ball mill is very diverse.
By using option
・Centrifugal separator
・Dispersion mixer

It is possible to use.

【Conventional Planetary Ball Mill】
・The rotation axis and the revolution axis are parallel.
・Slowly centrifugal acceleration of horizontal only in the same direction of rotation and revolution.
・The container receives force at one point of the rotation fixed axis. (The shaft is overloaded.)
・There is little vertical rotation due to horizontal and horizontal 1-axis rotation due to rotation and revolution.
・Therefore, the rotation of particles is small and the rotation of collision is small.

【Nagao System INC. tilted type planetary ball mill (Planet series)】
・The rotation axes of rotation (inclination) and revolution (horizontal) are two directions.
・Centrifugal acceleration occurs about several times as much as the conventional characteristics in the two rotation axes.
・The container receives force at two points: the revolving fixed axis and the self-contacting rubber. (The shaft is not overloaded.)
・Tornado rotation occurs by biaxial motion of rotation (inclination) and revolution (horizontal), resulting in high impact force.
・Therefore, the rotation of particles is large, strong impact force.

Product Catalog

Nagao System INC. was awarded in January 2018 as "2017 excellent small scale company" from Kanagawa Prefecture.

NAGAO SYSTEM INC. got the J-GoodTech first favorite registration ranking first place.
(February, 2015)

NEWS新着情報

MAY/16/2018
Nagao System INC. article was published in the Nikkan Kogyo Shimbun.
Nov/14/2018

New Value Creation Exhibition 2018
・November 14(Wed.) to 16(Fri.), 2018
https://shinkachi-portal.smrj.go.jp/exhibitor/shinkachi2018/
Venue:Tokyo Bigsight East Hall 2・3 (Booth I-028)
http://www.bigsight.jp/english/hotel/transportation/
Organizer:Small & Medium Enterprises and Regional Innovation
http://www.smrj.go.jp/english/index.html
We will exhibit our products at our booth.
We look forward to your visit.

JUL/20/2018
Japan Chamber of Commerce and Industry
「Fiscal supplementary budget for 2017」
It was adopted as a small business subsidy.
We have adopted for the third consecutive year.
(July 25, 2018).

Exhibitions Schedule

New Value Creation Exhibition 2018
・November 14(Wed.) to 16(Fri.), 2018
https://shinkachi-portal.smrj.go.jp/exhibitor/shinkachi2018/
Venue:Tokyo Bigsight East Hall 2・3 (Booth I-028)
http://www.bigsight.jp/english/hotel/transportation/
Organizer:Small & Medium Enterprises and Regional Innovation
http://www.smrj.go.jp/english/index.html
We will exhibit our products at our booth.
We look forward to your visit.

Constructure Show 2018 in Taipei
Nov.16(Fri.)-Nov.19(Mon.), 2018
Venue:Tapei World Trabe Center(TWTC)
http://www.twtc.com.tw/en/e-index.aspx
We will exhibit it at exhibition booth of Sou Le Enterprise Co., Ltd.
http://www.soule.com.tw/
We will exhibit our products at our booth.

POWTEX TOKYO 2018
・November 28(Wed.) to 30(Fri.), 2018
http://www.powtex.com/tokyo/en
Venue:Tokyo Bigsight East Hall 1・2・3 (Booth A-06)
http://www.bigsight.jp/english/hotel/transportation/
Organizer:「APPIE」The Association of Powder Process industry and Engineering, JAPAN
http://appie.or.jp/en/
We will exhibit it at exhibition booth of Kameyama Iron Works.
We will exhibit our products at our booth.

11th Kawasaki International Eco-Tech Fair
・Feburary 7(Thu.) to 8(Fri.), 2019
https://www.kawasaki-eco-tech.jp/
Venue:Culttz Kawasakihttps://www.kawasaki-eco-tech.jp/access.html
Organizer:Kawasaki International Environment Technology Exhibition Committee
We will exhibit our products at our booth.
We look forward to your visit.

The Ceramic Society of Japan The 2019 Annual Meeting
March 24(SUN.)−26(TUE.), 2019
http://www.ceramic.or.jp/csj/en/meetings.html
Venue:Kougakuin University(Shinjyuku Campus)
https://www.kogakuin.ac.jp/english/about/campus/accessmaps.html#anchor01
Organizer:The Ceramic Society of Japan
http://www.ceramic.or.jp/index.html
We will exhibit our products at our booth.
We look forward to your visit.

ナビゲーション

バナースペース

NAGAO SYSTEM INC.

1-9-30 Katahira Asao-Ward Kawasaki-City Kanagawa-Pref, 215-0023 JAPAN

TEL +81-44-954-4486
FAX +81-44-954-8258
E-mail fnagao@rose.plala.or.jp