本文へスキップ

Nagao System INC. is a professional group specializing in physics and chemistry instruments such as original fine pulverization, dispersion and mixing.

TEL. +81-44-954-4486

1-9-30 Katahira Asao-Ward Kawasaki-City Kanagawa-Pref, 215-0023 JAPAN

???????

製品カタログ一覧Brochures list

【3D Ball Mill(3D Reactor)】
・ (Medium Size) Table top type 2-axis control 3D Ball Mill (3D Reactor)「3D-210-D2」
・ (Medium Size) 3D Ball Mill (3D Reactor)「3D-180」
・ (Small Size) 3D Ball Mill (3D Reactor)(Glove box insertion model)「3D-80」
・ (Small Size) Separate type 3D Ball Mill (3D Reactor)(Glove box insertion model)「3DB-80」
・ (Medium Size) Table top type 1-axis control 3D Ball Mill (3D Reactor)「3D-180S」
・ (Small Size) 3D Rotation Planetary Ball Mill (3D Reactor)「3D-Planet-D」

【Tilted Rotation Planetary Ball Mill】
・ (Small Size) Tilted Rotation Planetary Ball Mill 「Planet M2-3F」
・ (Small Size) Tilted Rotation Planetary Ball Mill (Glove box insertion model) 「Planet Min (-F)」
・ (Medium Size) Tilted Rotation Planetary Ball Mill 「Planet 750F」
・ (Small Size) Tilted Dispersion Homogenizer 「Planet HF」

3D Ball Mill MOVIE(Ver.1)3D Ball Mill MOVIE(Ver.2)3D Ball Mill MOVIE(Ver.3)

LEAFLET

Presentation①10minPresentation②3min

Presentation③10minPresentation④3min

Presentation⑤30sec

 3D Reactor MOVIE(Ver.1) 3D Reactor MOVIE(Ver.2) 3D Reactor MOVIE(Ver.5)

     Comparision Data 2D Rotaton⇒3D Rotation Experiment DataExperiment DataExperiment DataExperiment DataExperiment data    3D Ball Mill CNT dispersion

Please feel the difference between the conventional high speed 2D rotation (critical) and 【unknown area】 high speed 3D rotation (non critical).

The high-speed 3D rotation realizing non-criticality enabled non-solidification, high homogeneity mixing, dispersion, milling!

High-speed 3D rotation can be expected to further reduce mixing unevenness and further improve milling uniformity.

Weak points of the high-speed 2D rotation are affected by gravity.
It agglomerates at the bottom with high specific gravity and fine material.
However, high-speed 3D rotation makes full use of the inner wall surface of the container.
It is the greatest feature that it does not give agglomeration time even with high specific gravity or fine material.



・Jap.Pat. 4974283 Clinostat
・Jap.Pat. 5666220 Three-dimention ball mill
・Jap.Pat. 5620088 Waste decomposition
・Jap.L.O. 2012-176331 Three-demention ball mill and ball mill and milling machines
・Jap.Pat. 5620027 Mixing device rotation
・USA.Pat. 6,387,298 B1 Luminescent Materials
【PCT】
PCT/JP2016/063183 Mixing method and rotating device

3D ball mill(3D Reactor) which our company independently developed and got a patent can not imitate other companies. A device of 3D high speed action is a products not found anywhere.

【Characteristics of 3D Ball Mill(3D Reactor)】
Wet & dry pulverization, mixing, mechanical alloying, mechanochemical reaction, production of amorphous material.
Because the entire container is used, milling and mixing heat hardly occurs. (Can be used for organic matter and inorganic matter.)
 
Goods that are good at milling and mixing to substances of mm or less such as automobiles, automobile parts, metals, electric machinery, batteries, chemicals, fibers, paints, glasses, pharmaceuticals, cosmetics,

 
Fine particles have an effect of enhancing synthetic strength, reactivity, conductivity, and thermal conductivity.

A 3D ball mill is a ball mill having two vertical and horizontal rotation axes, like a gyroscope alone. By adjusting the rotation of the two axes, the ball moves in a random direction, making it possible to efficiently milling and mixure using the whole container.
★ For milling, "3D ball mill"
★ For mixture, "3D Reactor"
More than usable.

Super points of 3D Ball Mill(3D Reactor)
①Dry process pulverization, mixture, dispersion without solidification
②Low thermogenesis with spherical motion
③Uniform pulverization, mixing and dispersion
④Non-criticality based on high-speed rotation
⑤Uniform mixing without blade
⑥Utilizing friction force and achieved pulverization, mixture, dispersion with maintaining particle form

【Merit】
①Thermogenesis problem in 2D rotation pulverization, mixture, dispersion
【Solution】
・Utilizing the entire inner area of the container promotes the dispersion of frictional heat and its generation. Effective with organic and inorganic substances.

②Uneven particle size in 2D rotation pulverization, mixture, dispersion
【Solution】
・Batched pulverization utilizing friction force of high-speed 3D rotation. Rounded particle form and uniform particle size.

③Solidification in 2D rotation dry pulverization, mixture, dispersion
【Solution】
・Achieving no solidification by high-speed 3D rotation dry pulverization.

④Uneven 2D rotation mixing (because of only one axis)
【Solution】
・Without blade. High-speed 3D rotation makes it possible to use entire inner area of container efficiently. Low thermogenesis and uniform mixing can be achieved.

【3D Ball Mill (3D Reactor) Recent Device Usage Example】
・Mixing and dispersion of 3D Printers.
(Mixing and dispersion of ceramics and resin, etc.)
・Mixing and dispersion of electro conductive Pastes and Inks for electronics.
(For example, mixing and dispersion having a difference in specific gravity between metal and resin)
・Mixing and dispersion of battery material(positive electrode material,negative electrode material), phosphor, magnetic material.
・Mixing and dispersion of special Inks such as printer.
(For example, mixing and dispersion of metal or glass and organic solvent)
・Mixing and dispersion of Medicines and Cosmetics sensitive to thermal change.
・Multiple special solvent emulsions, mixing and dispersion
・Mixture and dispersion of organic light emitting display.
・Optical resolution of pharmaceuticals.

【Advantages of Introducing 3D Ball Mill (3D Reactor)】
・Manufacturing loss (Irregular) reduction by improving uniformity.
・Reduction of raw material costs by miniaturization and highly uniform mixing.
・Reduction of manufacturing time and personnel cost.
・Introduced manufacturing method which could not be solved by existing equipment. (Differentiation from other companies)

「(Medium Size/Small Size)3D Ball Mill(3D Reactor)」


【(Medium Size) Table top type 2-axis control 3D Ball Mill 「3D-210-D2」(3D Reactor) 】
【PC control version (Manual & Program operation) available】
Since there are no critical rotation limit in rotating ball mill and segregat- ed distribution of the sample in the common planetary ball mill, highly efficient pulverization (milling) , mixture, dispersion or mechano-chemical reactions are expected due mainly to give energy to the sample quite uniformly through the three dimensional motion with two-rotation axes.
★ For milling,「3D Ball Mill」
★ For mixture,「3D Reactor」
It is possible to do.
【Main features】
・ Nano milling, mixture, dispersion .
・ Mechanochemical reaction.
・ Mechanical alloying.
・ Amorphous.
・ Dry non-solidification pulverization, mixture, dispersion .
(3D milling and mixing do not give time to solidify without being affected by gravity.)
・ Small heat generation during pulverization, mixture, dispersion .
(Because the milling ball and milling / mixture collide with the whole container surface, impact heat is dispersed.)
Realized.
・ It can also be used for mixing substances with different specific gravity and viscosity.
(It can be used as a 3D reactor.)
.
The size of 3D-210-D2 became more compact than 3D-180.
The container diameter is 210 mm at maximum.
The product specifications are as follows:
・Equipment housing color : gray, white
・Dimensions: W495 × H550 × D420 mm.
・Weight: 48 kg.
・Main axis(Upper and lower direction) Rotation speed: 0 to 300rpm
・horizontal rotation speed: 0 to 600rpm
・(vertical and horizontal rotation speed: 0 to 900 rpm).
・Reverse operation possible (2D tumbling ball mill and 3D ball mill switchable).
・Power supply: Two DC brushless motors (AC100V or 220V, 300W).
・Operating method: Manual or PC control (Manual & Program operation)
・Container: Diameter 210mm stainless steel (semi-) spherical container, etc.
・Option: 700ml zirconia container attachable.
・1 batch throughput: Metal container about 100g(ml)~1,200g(ml)
             Ceramics container about 100g(ml)~500g(ml)
★Design and specifications are subject to change without notice.


【(Medium Size) 3D Ball Mill (3D Reactor)「3D-180」】
Since there are no critical rotation limit in rotating ball mill and segregat- ed distribution of the sample in the common planetary ball mill, highly efficient pulverization (milling), mixture, dispersion or mechano-chemical reactions are expected due mainly to give energy to the sample quite uniformly through the three dimensional motion with two-rotation axes.
★ For milling,「3D Ball Mill」
★ For mixture,「3D Reactor」
It is possible to do.
【Main features】
・ Nano milling, mixture, dispersion .
・ Mechanochemical reaction.
・ Mechanical alloying.
・ Amorphous.
・ Dry non-solidification pulverization, mixture, dispersion.
(3D milling and mixing do not give time to solidify without being affected by gravity.)
・ Small heat generation during pulverization, mixture, dispersion.
(Because the milling ball and milling / mixture collide with the whole container surface, impact heat is dispersed.)
Realized.
・ It can also be used for mixing substances with different specific gravity and viscosity.
(It can be used as a 3D Reactor.)

3D-180 is a solid device specification.

The product specifications are as follows:
Equipment housing color : gray, white
・Dimensions: width 680 mm × depth 600 mm × height 660 mm

・Weight: 68 kg
Main axis(Upper and lower direction) Rotation speed: Rotation speed: 0 to 500 rpm
・Three-dimensional axis (Left and right direction) Rotation speed: 0 to 500 rpm
           (Main axis + three-dimensional axis rotation number = 0 to 1,000 rpm)
・Reversible operation possible (2D rolling ball mill and 3D ball mill switchable)
・Power supply: 2 DC brushless motors with AC 100V or 220V, 300 W used
Operating method: Manual or PC control (Manual & Program operation)
・Container: φ 180 mm stainless steel made (semi) spherical container and others

         : 700 ml zirconia container can be installed
・1 batch throughput: Metal container about 100g(ml)~1,200g(ml)
             Ceramics container about 100g(ml)~500g(ml)
★Design and specifications are subject to change without notice.


【(Small Size) 3D Ball Mill (3D Reactor)(Glove box insertion model)「3D-80」】
【PC control version (Manual & Program operation) available】
Since there are no critical rotation limit in rotating ball mill and segregat- ed distribution of the sample in the common planetary ball mill, highly efficient pulverization (milling) or mechano-chemical reactions are expected due mainly to give energy to the sample quite uniformly through the three dimensional motion with two-rotation axes.
★ For milling,「3D Ball Mill」
★ For mixture,「3D Reactor」
It is possible to do.
【Main features】
・ Nano milling, mixture, dispersion .
・ Mechanochemical reaction.
・ Mechanical alloying.
・ Amorphous.
・ Dry non-solidification pulverization, mixture, dispersion .
(3D milling and mixing do not give time to solidify without being affected by gravity.)
・ Small heat generation during pulverization, mixture, dispersion.
(Because the milling ball and milling / mixture collide with the whole container surface, impact heat is dispersed.)
Realized.
・ It can also be used for mixing substances with different specific gravity and viscosity.
(It can be used as a 3D Reactor.)

The size became more compact than the 3D-210-D2, 3D-180.
Integrated small 3D ball mill that can be inserted into a glove box.
The product specifications are as follows:
・Equipment housing color : gray, white
・Dimension:W370mm×D260mm×H360mm 
・Weight: 21kg
Main axis(Upper and lower direction) Rotation speed: 0~600rpm
・3D axis(Left and right direction) Revolution: 0~1,200rpm 
・Revolution of substantial 3-D frame: 0~1,800rpm
・Reversible motion is able to operate
・Power supply: AC100V or 220V (2 of 120W DC brushless motors installed)
・Maximum power consumption : 240W
・Operating method: Manual or PC control (Manual & Program operation)
・Pot(sample container)
: Zirconia or Alumina ball container φ80mm (Maximum amount of processing 100ml or 100g)
:Hemisphere combination canister φ80mm
:Other specs.
★Design and specifications are subject to change without notice.


【(Small Size) Separate type 3D Ball Mill (3D Reactor)(Glove box insertion model)「3DB-80」】
【PC control version (Manual & Program operation) available】
Since there are no critical rotation limit in rotating ball mill and segregat- ed distribution of the sample in the common planetary ball mill, highly efficient pulverization (milling) , mixture, dispersion or mechano-chemical reactions are expected due mainly to give energy to the sample quite uniformly through the three dimensional motion with two-rotation axes.
★ For milling,「3D Ball Mill」
★ For mixture,「3D Reactor」
It is possible to do.
【Main features】
・ Nano milling, mixture, dispersion.
・ Mechanochemical reaction.
・ Mechanical alloying.
・ Amorphous.
・ Dry non-solidification pulverization, mixture, dispersion .
(3D milling and mixing do not give time to solidify without being affected by gravity.)
・ Small heat generation during pulverization.
(Because the milling ball and milling / mixture collide with the whole container surface, impact heat is dispersed.)
Realized.
・ It is effective for mixing substances of different specific gravity and viscosity.
(It can be used as a 3D Reactor.)

It is also effective for mixing substances with different specific gravity and viscosity.
The separable type small 3D ball mill "3DB-80" is smaller in size than 3D-210-D2, 3D-180.
3D ball mill(3D Reactor) minimum size.
Glove boxes are available.
It is a compact 3D ball mill (3D Reactor) in which the equipment and operation panel are separated..


The product specifications are as follows:
・Equipment housing color : gray, white
・Dimension:W500mm×D260mm×H255mm 
・Weight: 17kg
Main axis(Upper and lower direction) Rotation speed:0~600rpm
・3D axis(Left and right direction) Revolution: 0~1,200rpm 
・Revolution of substantial 3D frame: 0~1,800rpm
・Reversible motion is able to operate
・Power supply: AC100V or 220V (2 of 120W DC brushless motors installed)
・Maximum power consumption :240W
・Operating method: Manual or PC control (Manual & Program operation)
・Pot(sample container)
:Zirconia or Alumina ball container φ80mm (Maximum amount of processing 100ml or 100g)
:Hemisphere combination canister φ80mm
:Other specs.

★Design and specifications are subject to change without notice.



【(Medium Size) Table top type 1-axis control 3D Ball Mill (3D Reactor)「3D-180S」】
Medium-size three-dimensional ball mill 3D-180S is a single motor, a ball mill with two vertical and horizontal rotation axes like gyroscope alone.

By adjusting the rotation of the two axes, the ball moves in a random direction, making it possible to efficiently crush and mix using the whole container.
★ For milling,「3D Ball Mill」
★ For mixture,「3D Reactor」
It is possible to do.
【Main features】
・ Nano milling, mixture, dispersion .
・ Mechanochemical reaction.
・ Mechanical alloying.
・ Amorphous.
・ Dry non-solidification pulverization, mixture, dispersion .
(3D milling and mixing do not give time to solidify without being affected by gravity.)
・ Small heat generation during pulverization.
(Because the milling ball and milling / mixture collide with the whole container surface, impact heat is dispersed.)
Realized.
・ It can also be used for mixing substances with different specific gravity and viscosity.
(It can be used as a 3D Reactor.)

The medium-size 3Dl ball mill "3D-180S" is a single motor, a ball mill with two vertical and horizontal rotation axes, like a gyroscope alone.
The product specifications are as follows:
Equipment housing color : gray, white
・Dimensions: width 490 mm × depth 390 mm × height 560 mm

・Weight: 38 kg
Main axis(Upper and lower direction) Rotation speed: 0 to 300 rpm
・Three-dimensional axis (Left and right direction) Rotation speed: 0 to 280 rpm
・Timer: 1 to 30 minutes (countdown) and continuous operation
・Power supply: AC100V or 220V, 300 W - DC brushless motor use
・Operating method: Manual or PC control (Manual & Program operation)
・Container: φ 180 mm stainless steel (semi) spherical container

: 700 ml zirconia container can be installed
・1 batch throughput: Metal container about 100g(ml)~1,200g(ml)
             Ceramics container about 100g(ml)~500g(ml)
★Design and specifications are subject to change without notice.



【(Small Size) 3D Rotation Planetary Ball Mill (3D Reactor)「3D-Planet-D」】
A 3D planetary ball mill is a ball mill having two rotation axes in both longitudinal and transverse directions, like a gyroscope alone.By adjusting the rotation of the two axes, the ball moves in a random direction, making it possible to efficiently milling and mixure using the whole container.
★ For milling, 「3D planetary ball mill」.
★ For mixture, 「3D Reactor".
There is the above usage method.
【Major features】
· Nano milling, mixture, dispersion .
· Mechanochemical reaction.
· Mechanical alloying
· Amorphous
· Dry non-solidification pulverization, mixture, dispersion
(Three - dimensional milling and mixing do not give time to solidify without being affected by gravity.)
· Small heat generation during pulverization, mixture, dispersion .
(Because the milling ball and milling / mixture collide with the whole container surface, impact heat is dispersed.)
This has been realized.
・It can also be used for mixing substances with different specific gravity and viscosity.
・3D planet ball mill "3D-Planet-D" is the smallest capacity model corresponding to centrifuge tubes, test tubes, etc.
・A sample of about 1g is also possible.
The product specifications are as follows:
Equipment housing color : gray, white
・Dimensions: width 490 mm × depth 380 mm × height 550 mm × depth 380 mm

・Weight: 35 kg
・Main axis(Upper and lower direction) : 0 to 800 rpm
・Rotation speed(Left and right direction) : 0 to 320 rpm
・Rotation speed in vertical (Upper and lower direction) : 0 to 160 rpm
・Rotational direction: reversible
・Timer: 1 to 30 minutes (countdown) and continuous operation
・Power supply: AC100V or 220V, 300 W - DC brushless motor use
・Operating method: Manual or PC control (Manual & Program operation)
・Container: 30 ml zirconia, 30 ml alumina container etc

・Other micro tubes, test tubes, 50 ml centrifuge tubes etc can be used
★Design and specifications are subject to change without notice.

Tilted Rotation Planetary Ball Mill 【Planet】

Product Catalog

A Tilted Rotation Planetary Ball Mill that we developed independently and acquired a patent is a product that other companies can not imitate.

The usual horizontal type planetary ball mill is exercised in only one direction lateral direction of revolution.


Compared to the conventional horizontal type planetary ball mill, our 「Tilted Rotation Planetary Ball Mill」 can exert crushing effect making use of
impact force several times higher.
The reason for
this is strong impulse from two directions, patented 'diagonal in the direction of rotation' and 'sideways in the direction of revolution'.
It is also used as a reactor utilizing kinetic energy, such as mechanical alloying, which makes use of strong impact force, and mechanochemical.

Also, since batch processing is the principle, it is possible to produce high quality products in small quantities.


The field of use of the planetary ball mill is very diverse.
By using option
・Centrifugal separator
・Dispersion mixer

It is possible to use.

(Medium size / Small size) Tilted Rotation Planetary Ball Mill (Planet Series)」

A Tilted Rotation Planetary Ball Mill that we developed independently and acquired a patent is a product that other companies can not imitate.

The usual horizontal type planetary ball mill is exercised in only one direction lateral direction of revolution.


Compared to the conventional horizontal type planetary ball mill, our 「Tilted Rotation Planetary Ball Mill」 can exert crushing effect making use of
impact force several times higher.
The reason for
this is strong impulse from two directions, patented 'diagonal in the direction of rotation' and 'sideways in the direction of revolution'.
It is also used as a reactor utilizing kinetic energy, such as mechanical alloying, which makes use of strong impact force, and mechanochemical.

Also, since batch processing is the principle, it is possible to produce high quality products in small quantities.


The field of use of the planetary ball mill is very diverse.
By using option

・Centrifugal separator
・Dispersion mixer

It is possible to use.

【Conventional Planetary Ball Mill】
・The rotation axis and the revolution axis are parallel.
・Slowly centrifugal acceleration of horizontal only in the same direction of rotation and revolution.
・The container receives force at one point of the rotation fixed axis. (The shaft is overloaded.)
・There is little vertical motion due to horizontal and horizontal 1-axis rotation due to rotation and revolution.
・Therefore, the rotation of particles is small and the rotation of collision is small
.

【Nagao System Inc. Tilted type planetary ball mill (Planet series)】
・The rotation axes of rotation (inclination) and revolution (horizontal) are two directions.
・Centrifugal acceleration occurs about several times as much as the conventional characteristics in the two rotation axes.
・The container receives force at two points: the revolving fixed axis and the self-contacting rubber. (The shaft is not overloaded.)
・Tornado motion occurs by biaxial rotation of rotation (inclination) and revolution (horizontal), resulting in high impact force.
・Therefore, the rotation of particles is large, strong impact force.


【(Small Size) Tilted Rotation Planetary Ball Mill「Planet M2-3F」】

This compact tilted rotaion planetary ball mill makes use of powerful gravitational acceleration (G) due to random motion. This compact tilted rotaion planetary ball mill is applicable to fine crushing (dry and wet), dispersion, kneading, degassing, mechanochemical reactions, mechanical alloying, and amorphous production. It also supports a PE 120 ml container for simple degassing kneading, centrifugal separation, and deposit peeling using a metal mesh.

Our Planet tilted rotaion planetary ball mill is said to have motion ability that is several times higher than the centrifugal acceleration of a vertical planetary ball mill. In the latter type the directions of revolution and rotation are only horizontal. This mill provides inclined acceleration (rotation) that is different from the horizontal acceleration (revolution).

Container capacity: 120 ml PE container (Kinki Yoki No. 12), double 80 ml zirconia container.
Maximum processing capacity: 80 ml/200 g PE container, 50 ml/200 g zirconia container (double: 100 ml/400 g in total).
Container material types
For milling: Zirconia, alumina, stainless steel, cemented carbide (WC-Co), etc.
For dispersion kneading: PE, PTFT (Teflon).
For media ball crushing: Zirconia (recommended), alumina, stainless steel, cemented carbide (WC-Co).
For dispersion kneading: PTFT (Teflon), zirconia, alumina.
Drive motor: 300W DC brushless.
Fan: T-MRS16-BUL-G 160-degree large fan.
Rotation drive: Circumferential inclined contact of SBR-added rubber.
Safety device: Automatic stop at overload, door locking for turning, and earthquake-sensing breaker (optional).
Maximum revolution speed: 900 rpm (revolutionary acceleration: 81.5 G).
Revolution/rotation ratio: 1 (number of revolutions) to 2.5 (number of rotations).
Maximum rotation speed: 2,250 rpm (rotation-alone acceleration: 170.5 G).
Sample acceleration: 252 G at 900 rpm revolution, 112 G at 600 rpm revolution, and 28 G at 300 rpm revolution.
Outside dimensions: W260 × D260 × H340 mm.
Main unit weight: 13 kg.
Power-supply capacity: 100/115V AC, 5A (step-down transformer for 200/220/240V AC).
By using option

・Centrifugal separator
・Dispersion mixer

It is possible to use
★Design and specifications are subject to change without notice.


【(Small Size) Tilted Rotation Planetary Ball Mill (Glove box insertion model) 「Planet Min (-F)」】

Glove-box tileted rotation planetary ball mill: This device is a glove-box tilted planetary ball mill. Its is used for fine crushing (dry and wet), dispersion, kneading, degassing, mechanochemical reactions, mechanical alloying, and amorphous production. It also supports a PE 120 ml container for simple degassing kneading, centrifugal separation, and deposit peeling using metal mesh.

Our Planet inclined planetary ball mill is said to have motion ability that is several times higher than the centrifugal acceleration of a vertical planetary ball mill.
In the latter type the directions of revolution and rotation are only horizontal. This mill provides inclined acceleration (rotation) that is different from the horizontal acceleration (revolution)

Container capacity: 80 ml with double zirconia containers (120 ml with Kinki Yoki No. 12 PE container).
Maximum processing capacity: 50 ml/200 g with zirconia container (double: 100 ml/400 g in total) or 80 ml/200 g each with PE container.
Container material types
For milling: Basically zirconia, but also alumina, stainless steel, cemented carbide (WC-Co).
For dispersion kneading: PE, PTFT (Teflon).
For media ball crushing: Zirconia (recommended), alumina, stainless steel, and cemented carbide (WC-Co).
For dispersion kneading: PTFT (Teflon), zirconia, and alumina.
Drive motor: 300W DC brushless motor.
Fan: T-MRS16-BUL-G 160-degree large fan.
Rotation drive: Circumferential inclined contact of SBR-added rubber.
Safety device: Automatic stop at overload.
Revolution/rotation ratio: 1 (number of revolutions) to 2.5 (number of rotations).
Maximum revolution speed: 900 rpm (revolutionary acceleration = 1.119 × radius of revolution (mm) × number of revolutions 2 × 0.000001 = 81.5 G).
Maximum rotation speed: 2,250 rpm (rotational acceleration = 1.119 × radius of rotation (mm) × number of rotations 2 × 0.000001 = 170.5 G).
Acceleration: Revolution G + Rotation G (252 G at 900 rpm revolution, 112 G at 600 rpm revolution, and 28 G at 300 rpm revolution).
Main unit dimensions and weight: W205 × D205 × H325 mm, 8 kg (Planet Min-F: fan model); W205 × D205 × H245 mm, 6.5 kg (Planet Min: no-fan model).
Operation box: W260 × D230 × H80 mm.
Weight: 2 kg.
Main unit cable length: 1.8 m.
Coupling: Metal connector.
Power-supply capacity: 100/115V AC, 5A (step-down transformer for 200/220/240V AC).
By using option
・Centrifugal separator
・Dispersion mixer

It is possible to use.
★Design and specifications are subject to change without notice.



【(Medium Size) Tilted Rotation Planetary Ball Mill「Planet 750F」】

This large-capacity device makes use of strong gravitational acceleration (G) using random motion.

Our Planet inclined planetary ball mill is said to have motion ability that is several times higher than the centrifugal acceleration of a vertical planetary ball mill. In the latter type the directions of revolution and rotation are only horizontal. This mill provides inclined acceleration (rotation) that is different from the horizontal acceleration (revolution).
The specifications are as follows:

Container capacity: 550 ml PE container (Kinki Yoki No. 55), 400 ml zirconia container (double each).
Maximum processing capacity: 400 ml/1 kg PE container, 300 ml/2 kg zirconia container (double: 600 ml/4 kg in total).
Container material types
For crushing: Zirconia, alumina, stainless steel, cemented carbide (WC-Co), etc.
For dispersion kneading: PE, PTFT (Teflon).
For media ball crushing: Zirconia (recommended), alumina, stainless steel, and cemented carbide (WC-Co).
For dispersion kneading: Teflon, zirconia, and alumina.
Drive motor: 750W AC servomotor with one-third speed reducer.
Fan: T-MRS25-D-G 250-degree large fan.
Rotation drive: Circumferential inclined contact of SBR-added rubber.
Safety device: Automatic stop at overload, door locking for turning, and earthquake-sensing breaker (optional).
Maximum revolution speed: 900 rpm (direction of rotation: CW) for PF container and 600 rpm (direction of rotation: CCW) for zirconia container.
Revolution/rotation ratio: 1 (number of revolutions) to 2.6 (number of rotations).
Maximum rotation speed: 2,340 rpm for PE container and 1,560 rpm for zirconia container.
Sample acceleration by revolution: 430 G at 900 rpm, 191 G at 600 rpm, and 48 G at 300 rpm.
Outside dimensions: W400 × D400 × H650 mm.
Main unit weight: 40 kg.
Power-supply capacity: Three-phase or single-phase 200/220/240V AC (100/115V AC also possible).
By using option

・Centrifugal separator
・Dispersion mixer

It is possible to use
.
★Design and specifications are subject to change without notice.


【(Small Size) Tilted dispersion homogenizer 「Planet HF」】

This compact inclined planetary ball mill for small-amount R&D makes use of powerful gravity acceleration (G) due to random motion. This compact inclined planetary ball mill for small-amount R&D is applicable to fine crushing (dry and wet), dispersion, kneading, degassing, mechanochemical reaction, mechanical alloying, and amorphous processing.

Container capacity: 50 ml PE container (single to four marketed containers with disposable centrifuge tube), or single to four 30ml zirconia containers.
Maximum processing capacity: 50ml PE container with centrifuge tube (50ml per piece) (four: two-thirds of the total of 50 ml ×4), 30 ml zirconia container (four: two-thirds of the total of 30 ml × 4), etc.
Container material types: Alumina, PTFT (Teflon), etc.
Media ball: Zirconia (recommended), alumina, stainless steel, cemented carbide (WC-Co).
For dispersion kneading: PTFT (Teflon), zirconia, and alumina.
Drive motor: 300W DC brushless.
Fan: T-MRS16-BUL-G 160-degree large fan.
Rotation drive: Circumferential inclined contact of SBR-added rubber.
Safety device: Automatic stop at overload, door locking for turning, and earthquake-sensing breaker (optional).
Maximum revolution speed: 1,500 rpm (revolutionary acceleration: 966 G "synthesis").
Revolution/rotation ratio: 1 (number of revolutions) to 4.5 (number of rotations) (fixed).
Maximum rotation speed: 6,750 rpm.
Outside dimensions: H295 × W310 × D370.
Main unit weight: 15 kg.
Power-supply capacity: 100/115V AC, 4A (step-down transformer for 200/220/240V AC).
★Design and specifications are subject to change without notice.

Our products Major fields of use


Why are ultrafine particles required?


このページの先頭へ

バナースペース

NAGAO SYSTEM INC.

1-9-30 Katahira Asao-Ward Kawasaki-City Kanagawa-Pref, 215-0023 JAPAN

TEL +81-44-954-4486
FAX +81-44-954-8258
E-mail fnagao@rose.plala.or.jp